How to save results and exit the Evaluation module

Introduction

After you have finished the evaluation process, you can save all the changes you have made to the chromatograms, including newly created curves and chromatograms that you have imported and created.

How to delete unwanted curves

All the curves that you created during your manipulations will be saved in the chromatogram. If some of these curves are not be needed anymore, select Edit:Delete:Curves in the Evaluation module to remove the curves.

Note: The original curves that were created during the run can never be deleted.

How to save the results

You can either save your edited results in the original file or in a new result file. The table below describes how to save the results in the Evaluation module.

If you want to save the edited results...

then...

in the original result file

  • select File:Save.

or

  • click the Save toolbar icon.

in a new result file

  • select File:Save as.

Note: The previous version of the result file will be overwritten if you save the changes. This cannot be reversed. However, the raw data curves remain unchanged.

How to exit the Evaluation module

The table below describes how to exit the Evaluation module:

Step

Action

1

Choose File:Exit.

Result: If there are unsaved changes, a dialog box opens with an option to save the changes before exit.

2

Select Yes if you want to save the changes.

Result: The result file is closed in the Evaluation module and the UNICORN Manager module is displayed.

2005-06-15